home
ipeco holdings
ipeco Seating
Benson Lund
ipeco galley
ipeco inc
ipe
pulse electronics
polymeric composites
Pulse Logo

Cheetah Power Modulescheetah2

Quarter size footprint 100W Output Power

Complete Power System NOT JUST CONVERTER STAGE

Transient Ride-through and input current limit active circuit

Common mode and differential mode magnetic filters with associate X and Y filter capacitors

Lightning Suppressors


Multi Alarm Bite Monitors:
• Power Good on Input
• Power Good on Output
• Over Voltage Protection
• Re-entrant Over-temperature protection at 115°C

Automatic Power sharing with defined voltage output characteristic without Single point of Failure system share line:
• Integrated Primary and Secondary Current Limit
• All above Removes Dormancy Problems

Robust Mechanical Integrity for Power and Bite Pins

Superior Shock Sustaining and Lowest Weight Category using State of the Art Integrated Planar Magnetics

    bsiLogo
Cheetah Series  
   
Specifications  
   
     
Input Characteristics   Environmental Characteristics
Module Input Options 28VDC (16V to 42V)   Temperature -40°C to +70°C*
Input Transient MIL-STD-704E*
Notes: *Except Fig. 11 for undervoltage
Output Characteristics
 

Temperature -40°C to +70°C*
Notes: *Dependent on cooling method.
Shock MIL-STD-810E
Vibration MIL-STD-810E
Acceleration MIL-STD-810E
Mass < 100g

Output Characteristics - Up to Three O/P 's   EMC Characteristics
@ Peak Power 100W
CH100W-DC028S-48/2
CH100W-DC028S-24/3A5
CH100W-DC028S-15/6
CH100W-DC028S-15/2A5-15N/2A5-5/4
CH100W-DC028S-1V2/4-3V3/4
CH100W-DC028S-15/3-15N/3-3V3/8
CH100W-DC028S-12/3-12N/3-5/10
  28VDC
MIL-STD-461E (Aircraft use)
CE102
Note: Achievable with minimum external components. Protected pins
provisioned to facilitate external connection for hold-up and transient
protection. Please ask factory for details.
    Reliability
Load Regulation < 1% typical   MTBF 20,000hrs @ AUF 50°C
Line Regulation < 0.3% typical     as per MIL-HDBK-217[2]
Ripple and Noise (20MHz BW) < 1% typical    
     
General   Optional
Efficiency 90%
Isolation Input to Case 500V
Input to Output 500V
Output to Case 500V
Form Factor See image dimensions

  Intelligent power control digital interface available.
Please ask factory for details.
  cheetah3
Protection Characteristics  
Output Over-voltage 115% of nominal
Output Over-current 115~140% of maximum
Over-temperature 115°C baseplate
(retries at 110°C)
Reverse Input Yes
Zero Load Operation Yes
Short Circuit Latch or retry option
Input Over-current 150% of maximum

 
Alarms   Dimensions
Output Voltage Good, Input Voltage Good and
Over-temperature
  Width: 40mm Height: 20mm Depth: 70mm
     
  • For information on configuration possibilities/alternatives and future development/expansion detail on Cheetah Modules please click here.
     
Download Data Sheet adobe    

Please contact us sales@pulse-electronics.co.uk for further information and to detail any particular application.
Our engineering team would be pleased to assist and we welcome the opportunity of working with you.