home
ipeco holdings
ipeco Seating
Benson Lund
ipeco galley
ipeco inc
ipe
pulse electronics
polymeric composites
Pulse Logo

Tiger Power System tiger2

Complete Power System up to 2kW Output Power
Up to Six Power Converter Channels each with system characteristics to Resolve Dormancy issues:

• Active Transient Ride-through
• Input current limit
• Automatic Power sharing with defined voltage output characteristics without Internal Single point ofFailure system share line

ULTIMATE EMC PERFORMANCE MEETING DEF-STAN 59-41 LAND CLASS A
TRUE N +1 System Redundancy and Protection on Both Input and Output Terminals suitable for Battery Charging for Land vehiclestiger3
Multi Channel Alarm Bite Monitors:

• Power Good on Output
• Over Voltage Protection
• Re-entrant Multi Alarm Thermal spreading Over Temperature protection at 105°C and restarts at 95°C - i.e System reduces power when one channel stops but recommences power provision as soon as it cools down

Ultimate Mechanical Integrity associated with both internal and external connections
Superior Shock Sustaining and Lowest weight Category with State of the Art Integrated Planar Magnetics

    bsi
   
Tiger Series  
   
Specifications  
   
     
Input Characteristics   Protection Characteristics - Multi Channel
Module Input Options 115VAC 400Hz PFC*
270VDC*
28VDC (16V to 42V)
*Dual I/P or 3PH I/P
  Output Over-voltage
Output Over-current
Over-temperature

Reverse Input
Zero Load Operation
Short Circuit
Input Over-current

115% of nominal
115~140% of maximum
105°C baseplate
(retries at 95°C)
28VDC Input Only
Yes
Latch or retry option
150% of maximum
Input Transient (270VDC)
(115VAC 400Hz)
(28VDC)

MIL-STD-704E
MIL-STD-704E
DEF-STAN 61-5 Pt. 6,
MIL-STD-704E

Notes: *In order to meet the undervoltage requirements, external holdup
capaitance will be required
Integrated holdup depends on output configuration, please see output
characteristics


  Alarms
  Output Voltage Good, Input Voltage Good and
Over-temperature
Output Characteristics – N+1 Redundant    
Configurable Nominal Outputs
@ Maximum Current for either
270VDC or 115VAC 400Hz
Inputs


Notes:

48V @ 20.8A
28V @ 35.7A
24V @ 41.7A
15V @ 66.6A
12V @ 75.0A

*Output power is dependent upon battery input - 24V-32V
+When integrated with 12ms internal holdup
Dual O/P versions are available including up to 90V O/P

  Environmental Characteristics
Temperature
Notes:

Shock
Vibration
Acceleration
Drop
Ingress
Mass <

–32°C to +70°C*
*Dependent on cooling method

DEF-STAN-0035 Pt. 3 Chp. 2-03 M3
DEF-STAN-0035 Pt. 3 Chp. 2-01 M1
BS 3G100 Pt. 2 Sec. 3 CI 1A & CI12
DEF-STAN-0035 Pt. 3 Chp. 2-04 M4
IP67
4kg (series 1), <7kg (series 2)
Configurable Nominal
Outputs @ Maximum Current
For 28VDC Input

Notes:
28V @ 65.0A*
24V @ 60.0A* (30A+)
15V @ 100A* (50A+)

*Output power is dependent upon battery input - 24V-32V
+When integrated with 12ms internal holdup
Dual O/P versions are available including up to 90V O/P
 
 
  EMC Characteristics
  270VDC & 115VAC
400Hz Input
MIL-STD-461E (Aircraft use)
CE101, CE102, CS101,
CS114, CS116
28VDC Input





Note:
*DEF-STAN 59-41
(Options available for
minimum tested compliance
to Land Class A DCE01,
DCS01, DRE01)

*Form Factor applies to series 2

Other Available (Multiple)
Variable Output
Configurations @
Maximum (Single)
Current
for 28VDC Input

Note:

5V @ 30.0A+ (60A++)
3V3 @ 20.0A+ (40A++)
±12V @ 2.5A+ (5A++)
5V @ 125A* or
3V3 @ 125A*


+Dual redundant
++Non-redundant
*When integrated with 12ms internal holdup

     
  Reliability  
  MTBF > 50,000hrs @ 50°C AUF as
per MIL-HDBK-217[F2]

Optional

Intelligent power control digital interface available.
Please ask factory for details.
 

tiger4
Load Regulation < 1% typical  
Line Regulation < 0.3% typical
Ripple and Noise (20MHz BW) < 1% typical
   
   
General Input Options 28VDC 270VDC/ 115VAC
Efficiency 85% 90% max
Isolation Input to Case 500V 1.4kV
  Input to Output  500V 1.4kV
  Output to Case 500V 500V Dimensions
    Series 1: Width: 255mm Height: 46mm Depth: 240mm
Series 2: Width: 255mm Height: 86mm Depth: 240mm
Download Data Sheet adobe    

Please contact us sales@pulse-electronics.co.uk for further information and to detail any particular application.
Our engineering team would be pleased to assist and we welcome the opportunity of working with you.